Паровой термоусадочный туннель
TY-F1015 Compact Steam Shrink Tunnel Machine
A compact steam shrink tunnel solution designed for shrink sleeve applications, pilot production and space-limited packaging lines.
Key Advantages
Compact Footprint
A 1500 × 460 × 1400 mm machine envelope fits laboratories, pilot lines and space-limited production areas.
External Steam Integration
Split-type design connects to an external steam source with thermal power of no less than 18 kW — no integrated steam generation required.
Uniform Shrink Quality
The steam distribution system directs steam around the product path so the sleeve contracts evenly across the container surface.
Flexible Production Setup
Suited to sampling, pilot production and small-batch operation, with manual or automatic feeding.
Designed for Compact Production Applications
TY-F1015 is intended for compact steam-shrink applications where a full-size industrial tunnel would exceed requirements.
Typical uses include shrink sleeve application on small production lines, in sampling areas and in space-limited facilities.
- Sampling
- Small-Batch Production
- Compact Facilities
- Shrink Sleeve Application
Steam Shrink Technology for Sleeve Label Applications
Steam is a widely used heating medium for shrink sleeve applications because it transfers heat evenly across the curved surface of the container. Unlike convection or radiant heat, steam conforms to the product geometry, allowing consistent contraction of the sleeve material.
Because steam shrinking is sensitive to steam quality, sleeve material and production scale, machine selection should follow the actual application — not a generic specification. A compact tunnel such as TY-F1015 is intended for environments where a full-size production tunnel would be over-specified. For the complete machine range and technology overview, see Tengyi’s steam shrink tunnel solutions.
External Steam Supply
TY-F1015 is a split-type steam shrink tunnel and requires an external steam source with thermal power of no less than 18 kW.
Existing Steam Source
Use an existing suitable steam source.
No Existing Steam Source
A matched electric steam generator can be supplied.
Engineering Design Explained
The TY-F1015 machine configuration is based on two engineering design features, described below.
Uniform Steam Exposure
The steam distribution system directs steam around the product path so the sleeve is exposed evenly during shrinking.
- Design: Steam distribution around the product path.
- Benefit: Even sleeve contraction across the container surface.
Split-Type Configuration
TY-F1015 is a split-type system, separating the shrink tunnel from the steam source. This keeps the shrink chamber compact and allows the steam source to be installed to suit the customer’s site layout.
- Design: External steam source integration.
- Benefit: Compact footprint at the production line; flexible steam source placement.
Compatible Sleeve Materials
Other sleeve materials should be evaluated through sample testing before final machine selection.
Технические характеристики
Specification data for the TY-F1015 compact steam shrink tunnel.
| Артикул | Технические характеристики |
|---|---|
| Модель | TY-F1015 |
| Общая мощность | 0.2 kW |
| Электропитание | 220 V / 1 A |
| External Steam Source | Thermal power no less than 18 kW |
| Грузоподъемность | 5 kg |
| Maximum Capacity | 500-800 pieces/hour |
| Steam Consumption | 24 kg/hour |
| Maximum Shrink Film Size | 80 × 320 mm |
| Габаритные размеры | L1500 × W460 × H1400 mm |
Is TY-F1015 Right for Your Application?
TY-F1015 is one model in the Tengyi steam shrink tunnel range. The appropriate machine configuration depends on container geometry, sleeve material, required production capacity and the available external steam source.
Explore More Steam Heat Tunnel Solutions
Looking for different tunnel sizes, steam configurations, or production capacities? Browse our complete range of Steam Tunnel Systems
Часто задаваемые вопросы
What production capacity can TY-F1015 achieve?
The maximum production capacity of TY-F1015 is 500-800 pieces per hour. Actual output depends on container size, sleeve material and steam supply stability.
Which sleeve materials are compatible with TY-F1015?
PVC and PET are compatible sleeve materials for TY-F1015. Other materials should be evaluated through sample testing before final machine selection.
Does TY-F1015 require an external steam source?
Yes. TY-F1015 is a split-type steam shrink tunnel and requires an external steam source with thermal power of no less than 18 kW. Where no suitable source exists, a matched electric steam generator can be supplied.
What information should I provide for machine selection?
Container material, dimensions and shape; sleeve material and dimensions; required production capacity; feeding method (manual or automatic); and the available external steam source.